Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 451 / 556

Trouble during Printing
449
Probl
em
So
lving
16
The Printed Result is not what was Expected
Described solutions for situations in which the print result is different from that
expected.
No Cause The printer is connected to multiple computers.
Action Wait for a while, and then try printing again.
Sent to printer Cause Out of paper.
Action Supply paper to the printer.
Cause No paper for the specified paper size.
Action Set paper for the specified paper size.
Refer to "Loading Paper in Trays 1 to 4" (P.232), or "Loading
Paper in Tray 5 (Bypass)" (P.233).
Cause Copy operation is performed during interrupt, and interrupt
is performed.
Action Cancel the interrupt operation.
Cause An error occurred with the printer.
Action Check the error details.
Cannot print in color Cause In print options, the [Output Color] is set to [B/W].
No Action Set [Output Color] to [Auto] or [Color].
No stapling done Cause The finisher is not attached.
No Action A finisher is needed to perform stapling. Attach a finisher, or
remove stapling from the print options.
Cause The number of pages to staple exceeds 50.
Action A maximum of 50 pages can be stapled. Reduce the
number of printed pages to 50 or lower.
Cannot print 2 sided Cause The duplex module is not attached.
No Action For 2 sided printing, the duplex module is needed. Attach
the duplex module, or remove 2 sided printing from the print
options.
Cause Insufficient print page buffer.
Action Add memory.
Printing performed with a
different paper size. Cause Paper size provided is different from the specified tray size.
No Action Change the paper size set in the tray, or change print
options to specify a tray that contains the appropriate size.