Fuji Xerox DocuCentre-II 6000, Руководство пользователя

Страница: 62 / 206

3 Copy
60
Co
py
3
Copy
You can set the basic features on the [Copy] screen. The following shows the reference
section for each feature.
Reduce/Enlarge (Making Enlarged/Reduced Copies) ................................................................60
Paper Supply (Selecting the Paper for Copying) ........................................................................62
2 Sided Copying (Making 2 sided Copies) .................................................................................64
Image Shift (Shifting the Image Copy Position).........................................................................65
Edge Erase (Erasing Edges and Margin Shadows in the Document) .........................................66
Lighten/Darken (Adjusting the Copy Density) ...........................................................................66
1
On the [All Services] screen, select
[Copy].
2
Select features on the [Copy]
screen.
Reduce/Enlarge (Making Enlarged/Reduced Copies)
You can select a ratio to make enlarged or reduced copies.
1
Select the copy ratio from [Reduce/
Enlarge].
„
Entering the Ratio
Enter a value between 25 and
400% in 1% increments, by touching the entry box and then using numeric keys or by
using the [ ] and [ ] buttons.
„
100%
Copies are made at the same size as the original document.
„
Auto %
The copy ratio is automatically set based upon the document and paper sizes specified
in [Paper Supply], and the document is copied to fit in the specified paper size.
Note • If you select [Auto %], specify a value other than [Auto Paper] for [Paper Supply].
„
Ratio (3rd button)
Select from preset ratios.
You can change the indicated ratios. For information on the settings, refer to "6 System Settings" >
"Copy Mode Settings" > "Copy Tab (DocuCentre series models) / General Settings Tab - Feature
Allocation (ApeosPort series models)" > "Reduce/Enlarge - Buttons 3 and 4 (DocuCentre series models)
/ Preset Buttons
J
Reduce/Enlarge - Button 3 - 5 (ApeosPort series models)" in the Administrator
Guide.
„
More...
Displays a pop-up window. Select a ratio from the options. Selecting [More] in the pop-
up window displays the [Reduce/Enlarge] screen.
Refer to "When [Proportional %] is Selected" (P.61), "When [Independent X-Y%] is Selected" (P.61),
or "When [Calculator %] is Selected" (P.62).