manualshive.com logo in svg

Fuji Xerox ApeosPort-V 4070, Руководство администратора

Продукт Fuji Xerox ApeosPort-V 4070 предоставляет администраторам и пользователям возможность легкого управления задачами печати и сканирования. Скачайте бесплатно Руководство администратора с нашего веб-сайта, чтобы максимально использовать функционал этого устройства. manualshive.com - ваш источник качественных руководств и инструкций.

Поделиться
Скачать
background image

7 Printer Environment Settings

312

P

rint
e

r En

v

iro
nmen

t Set

tin

g

s

7

3

Set an IP address and the other addresses.
Skip this step if an IP address is already set.
If DHCP or BOOTP is available in your environment, configure the method for obtaining the 
address. The configuration of an IP address, a subnet mask, and a gateway address is not 
required.

For information on how to set an IP address, refer to "Protocol Settings" (P.181).

4

If the operating system on the client is Mac OS X 10.5 or later, enable the Bonjour port, and 
the Discovery feature that automatically detects printers on the IP network can be 
enabled.

Note

•

To print from a printer detected by Bonjour, the LPD port must be enabled in advance.

1) Select [Connectivity & Network Setup].

2) Select [Port Settings].

3) Select [Bonjour], and then select [Change Settings].

4) Select [Port Status], and then select [Change Settings].

5) Select [Enabled], and then select [Save].

5

Select [Close] repeatedly until the [Tools] screen is displayed.

6

Select [Close].

Note

•

Rebooting the machine may be required depending on the settings. When a message displayed on 
the screen, follow the message and reboot the machine.

7

Print a configuration report to confirm that the LPD port is enabled and that TCP/IP is set 
up correctly.

For information on how to print a configuration report, refer to "Print Reports" (P.90).

8

Configure other LPD or Port9100 settings as necessary. 

For information on how to set up the LPD port or Port9100, refer to "CentreWare Internet Services Setting Items" (P.312).

Step 3 Configuration on the Computer

To print from the machine, you need to install a print driver on your computer.

For information on the supported operating systems, refer to "Supported Operating Systems" (P.305). 

For information on the driver installation procedures, refer to the manual contained in the Media (Software/Product 
Manual).

You can print via TCP/IP (LPD) from a Macintosh computer for Mac OS X 10.5/10.6, Mac OS X 10.7 Lion, OS X 10.8 Mountain 
Lion, and OS X 10.9 Mavericks. For information on the installation procedures of the print driver for Mac OS X, refer to the 
manual contained in the Media (Software/Product Manual).

For information on the installation procedures of Adobe PostScript 3 Kit (optional), refer to the manual contained in the CD-
ROM provided with the Adobe PostScript 3 Kit (optional).

CentreWare Internet Services Setting Items

You can configure the following setting items using CentreWare Internet Services:

For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet Services screen to see help.

Important •

To display the online help for CentreWare Internet Services, users need to have the environment to 
connect to the Internet. The communication fee shall be borne by you.

For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.298).

z

Spool Destination for Jobs
([Properties] > [General Setup] > [Memory Settings] > [LPD])

Note

•

The spool destination can be configured when the LPD port is enabled.

Содержание ApeosPort-V 4070
















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ApeosPort-V 4070

NCR 7197 Manual preview
7197
Бренд: NCR Страницы: 10
Canon imagePROGRAF W8400 Driver Manual preview
imagePROGRAF W8400
Бренд: Canon Страницы: 24
Canon imagePROGRAF TZ-30000 Setup Manual preview
imagePROGRAF TZ-30000
Бренд: Canon Страницы: 66
Canon imagePROGRAF W7200 Setup Manual preview
imagePROGRAF W7200
Бренд: Canon Страницы: 126
Canon imagePROGRAFi iPF840 series Basic Manual preview
imagePROGRAFi iPF840 series
Бренд: Canon Страницы: 149
Canon IPF850 Basic Manual preview
IPF850
Бренд: Canon Страницы: 166
Canon iP4000 - PIXMA Photo Printer Start Here preview
iP4000 - PIXMA Photo Printer
Бренд: Canon Страницы: 2
Olympus P 400 Firmware Upgrade Manual preview
P 400
Бренд: Olympus Страницы: 3
Canon BW Remote Operators Software Kit-A1 Service Manual preview
BW Remote Operators Software Kit-A1
Бренд: Canon Страницы: 20
Canon imageRUNNER 2420 Trouble Error Codes List preview
imageRUNNER 2420
Бренд: Canon Страницы: 30
Canon IPF850 Service Manual preview
IPF850
Бренд: Canon Страницы: 51
Canon imageCLASS LBP325dn Service Manual preview
imageCLASS LBP325dn
Бренд: Canon Страницы: 252
Samsung ML-6050 Manual Del Usuario preview
ML-6050
Бренд: Samsung Страницы: 82
Samsung ML-2525 Datasheet preview
ML-2525
Бренд: Samsung Страницы: 2
ABLE AP1200 Programmer'S Manual preview
AP1200
Бренд: ABLE Страницы: 26
Dascom DP-520 User Manual preview
DP-520
Бренд: Dascom Страницы: 12
Dascom DP-510 Operator'S Manual preview
DP-510
Бренд: Dascom Страницы: 19
Dascom DC-7600 Assembly Instructions preview
DC-7600
Бренд: Dascom Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды