42
42
Replacing Consumables
Replacing R2 & R3 Booklet Staple Cartridge (For C Finisher)
1:
Ensure machine is idle before opening the A1 Finisher Door. Open the Finisher Door.
2:
Pinch the two Booklet Maker access handles together, and pull out the Stapling Unit.
3:
Squeeze the Staple Cartridge handles and pull to remove the used cartridge..
4:
Unpack and install new cartridge. It will click into place when installed correctly.
5:
Return the Stapling Unit to its original position.
Close the Finisher Front Door.
Replacing Booklet Staple Cartridge (For B1 Finisher)
1:
Make sure that the machine has stopped copying / printing, then open the top of the
Finisher, facing the scanner.
2:
Squeeze the tabs on the side of the staple cartridge and the lift the cartridge to remove
it from the stapler.
3:
Repeat the process to remove the second cartridge.
4:
Squeeze the tabs on the cartridge and install it into the stapler.
5:
Push down gently on the cartridge until the second cartridge.
6:
Repeat steps 4
–
5 to install the second cartridge. Close the top of the Finisher.
1
2
3
4
5
1
2
3
For used cartridges disposal, please call us @ 1-300-88-1163 for collection.