4
FIRE AND EXPLOSION HAZARD
Turbine must not be used in an area contaminated by volatile or
flammable materials since sparking can be expected in the normal
operation of the motor. This could ignite the contaminants causing
a dangerous explosion.
• Do not spray flammable or combustible materials near an open
flame or sources of ignition such as cigarettes, motors, and
electrical equipment.
• Keep spray area well-ventilated. Keep a good supply of fresh air
moving through the area. Keep turbine in a well-ventilated area. Do
not spray turbine.
• Do not smoke in the spray area.
• Do not operate light switches, engines, or similar spark producing
products in the spray area.
• Keep area clean and free of flammable materials.
• Fire extinguisher equipment shall be present and working.
• Turn off and disconnect power cord before servicing equipment.
• Ensure ground prongs are intact on sprayer and extension cords.
• Never use 1,1,1-trichloroethane, methylene chloride, other
halogenated hydrocarbon solvents or fluids containing such solvents
in equipment with aluminum wetted parts. Such use could result in a
serious chemical reaction, with the possibility of explosion. Consult
your fluid suppliers to ensure that the fluids being used are
compatible with aluminum parts.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in
the eyes or on skin, inhaled, or swallowed.
• Always wear appropriate gloves and eye protection.
• Always wear a mask. Read all instructions of the respirator or
mask to ensure that it will provide the necessary protection against
the inhalation of harmful vapors. Please also check with the local
jurisdiction.
• Tanning Solution and other materials may be harmful if inhaled.