37
INZ-TN2ZPAJ-E
6.3.2 Hysteresis setting
7RSUHYHQWFKDWWHULQJRIDQDODUPRXWSXWQHDUWKHDODUPVHWWLQJYDOXHVDGMXVWWKHYDOXHRIK\VWHU
-
esis.
,QWKH³$ODUP6HWWLQJ´VFUHHQWKDWDS
-
SHDUVSRLQWWKHFX\VWHUHVLV´E\
SUHVVLQJWKH RUWKH NH\3UHVVWKH
ENT
NH\WRGLVSOD\WKHVFUHHQVKRZQDW
ULJKW
7KHQHQWHUK\VWHUHVLVYDOXHV
)RUWKHYDOXHHQWU\GLJLWYDOXHLV
LQFUHDVHGRUGHFUHDVHGE\SUHVVLQJWKH
RUWKH NH\DQGSUHVVLQJWKH
key
PRYHVWKHGLJLW$IWHUVHWWLQJSUHVVWKH
ENT
NH\WRP\VWHUHVLV´YDOLG
Hysteresis (In case of upper limit alarm)
$QDODUPRXWSXWLVWXUQHG21LIPHDVXUHPHQWYDOXHH[FHHGVWKHXSSHUOLPLWYDOXHDVVKRZQ
EHORZ2QFHWKHDODUPRXWSXWKDVEHHQWXUQHG21LWLVQRWWXUQHG2))DVORQJDVWKHLQGL
-
FDWLRQGRHVQRWIDOOEHORZWKHK\VWHUHVLVZLGWKIURPWKHXSSHUOLPLWYDOXH
0 to 20% of full scale
[% full scale (FS)] represents the percentage
with the width of the component measurement
range regarded as 100%.
Setting range
Upper limit value
ON (close)
OFF (open)
Hysteresis
width
Alarm
Contact output
( )
ENT
End of Hysteresis Setting
Note
The hysteresis is common to all alarms
(components).
Hysteresis in peak alarm setting
described in Section 6.3.3 should be set
separately.
To close the “Hysteresis Setting” or cancel
the mode midway, press the
key.
A previous screen will return
.
To close "Hysteresis Setting"
ESC
