– 11 –
4
Operation
1) To move to the running state (level 1) from the parameter setting state (level 2, 3, 4),
press the key for 3 seconds in the parameter name displayed state.
1) When a period of 3 seconds has elapsed since the parameter set value was
changed, the data is registered even if the
key is not pressed.
The increase/decrease speed changes when
the or key is kept pressed.
1) Select a parameter you want to set by pressing the or key.
2) Press the key to display the parameter set value.
3) Pressing the or key, to change the parameter set value.
4) After the parameter has been changed, press the key for registration.
Caution
Parameter name display
1)
2)
3)
3)
4)
Set value display
<Method for move of level 1>
SEL
SEL
SEL
SEL
SEL
<Parameter setting procedure>
SEL
Parameter setting mode (level 2, level 3, level 4)
