Fuji Electric OPC-VG1-PMPG, Инструкция по эксплуатации

Страница: 16 / 16

- 8 -
(1) Mount the digital 16-bit option onto connector D-port provided on the control PCB.
(2) Secure the digital 16-bit option with two screws "a" (that come with the option) through holes and , then set
four spacers "b" (that come with the option) into holes to .
(3) Set spacer "d" (that comes with this interface card) onto location "c" of the option mount provided on the control
PCB.
(4) Mount the interface card so that connector CN1 on the card comes to be connected to connector B-port on the
control PCB.
(5) Secure the interface card with three attached screws "e."
(6) Connect the power cable from the option to CN24 on the “Control PCB”.
(7) Mount the front cover in the reverse order of removal, referring to Figure 2.1-1 or 2.1-2.
Figure 2.2-2 Mounting the Interface Card (when connecting to B-port)
History of revision
Number Date of revision Remarks
- November 2011 First edition
Copyright 2011 Fuji Electric Co., Ltd.
No part of this publication may be reproduced or copied without prior written permission from Fuji Electric Co., Ltd.
All products and company names mentioned in this manual are trademarks or registered trademarks of their
respective holders.
The information contained herein is subject to change without prior notice for improvement.
The purpose of this instruction manual is to provide accurate information in handling, setting up and operating of the
PG interface card. Please feel free to send your comments regarding any errors or omissions you may have found,
or any suggestions you may have for generally improving the manual.
In no event will Fuji Electric Co., Ltd. be liable for any direct or indirect damages resulting from the application of the
information in this manual.
Fuji Electric Co., Ltd.
Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome, Shinagawa-ku, Tokyo, 141-0032, Japan
Phone: +81 3 5435 7058 Fax: +81 3 5435 7420
URL http://www.fujielectric.com/
2011-11