MICREX-F Series SIO Driver
GP-Pro EX Device/PLC Connection Manual
2
Introduction
This manual describes how to connect the Display and the External Device (target PLC).
In this manual, the connection procedure will be described by following the below sections:
1
System Configuration
This section shows the types of External
Devices which can be connected and SIO
type.
)
"1 System Configuration" (page 3)
2
Selection of External Device
Select a model (series) of the External
Device to be connected and connection
method.
)
"2 Selection of External Device" (page 7)
3
Example of Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
)
"3 Example of Communication Setting"
(page 8)
4
Setup Items
This section describes communication
setup items on the Display.
Set communication settings of the Display
with GP-Pro Ex or in offline mode.
)
"4 Setup Items" (page 24)
5
Cable Diagram
This section shows cables and adapters
for connecting the Display and the
External Device.
)
"5 Cable Diagram" (page 29)
Operation
