1-1
Chapter 1 BEFORE USING THE REMOTE KEYPAD "TP-E1"
1.1 Check
Points
Unpack the package and check the following:
(1) The package contains the Remote Keypad and its instruction
manual (this book).
(2) There have been no problems during transportation. In
particular, no parts are damaged or have fallen out of place
nor are there any dents on the body.
(3) The model name "TP-E1" is inscribed on the back of the
Remote Keypad as shown in Figure 1.1.
If you find any anomalies, contact your dealer or nearest Fuji
Electric sales office.
Model name
Figure 1.1 Back of Remote
Keypad TP-E1
1.2 Inverters with which the Remote Keypad Interfaces
The Remote Keypad TP-E1 interfaces with the following Fuji inverters:
Series
Type of inverter
*
Remarks
FRENIC-Mini FRN
C1S-
FRN
C1E-
(
Each
has its meaning
as shown below,
represented by an
alphanumeric character.
)
The Remote Keypad is fully supported by inverters with
a ROM version of C1S10500 or above. (You can check
the inverter’s ROM version by entering
5_14
in
"Maintenance Information" (Menu #5) in Program
Mode.)
There are restrictions on the support for the Remote
Keypad TP-E1 by inverters with a ROM version of
C1S10499 or below. For details, contact your Fuji
Electric sales office.
* Type of inverter
For the details of the Inverter type ID, refer to the FRENIC-Mini Instruction Manual
(INR-SI47-0791-E), Chapter 1, Section 1.1 "Acceptance Inspection."
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com