Description
Type
Outline dimensions
Control box
Type
AR9Y920
Application:
• Plastic control box for mounting the emergency stop pushbut-
ton switch separately.
• Mounting pitch
58
[Unit: mm]
79
ø22.3 (Equipped with a protrusion)
●
Be sure to use and store the product within the rated ambient temperature and humidity ranges.
●
Although the product resists ordinary cutting oils and coolant oils, do not use the unit in places where special oils may be
sprayed onto the product. If you
experience this issue
,
please contact
Fuji Electric.
●
If dusts or filings accumulate in the gap between the button and the frame, the switch may fail to operate normally.
●
This switch are for indoor use. Don’t use the switch for outdoor use and make sure that the product is not exposed to direct
sunlight.
●
Do not use the product in the places that are subject to the adverse effects of ozone or corrosive gases.
●
Features
• Control box for mounting the emergency stop pushbutton switch AR22VQR/VQL, VPR.
• It is easy to mount or add this box to the desired places away from the operating panel.
• Degree of protection : IP65 (when using applicable connector)
• Double-insulation structure without the need for an earth wire. (compliant with IEC536 class II)
• The knockout holes open at the top, bottom, and back.
• The emergency stop Legend plate (AR9P722) can be mounted.
■
Storage and Usage Locations
■
Control box dedicated for emergency stop pushbutton switch
■
Accessories
Description
Type
Dimensions
Wrench
Type
Used with
AR9A701
AR22VQR, VQL, VPR
AHX536
AR30VPR, VPL
Application:
This allows you to tighten the tightening ring when mounting the
command switch on a panel.
AR9A701: ø28 mm × 60 mm
AHX536 : ø32 mm × 76 mm
Legend plate
Type
Used with
AR9P722-(1)(2)
AR22VQR, VQL
AR9P723-(1)(2)
AR22VPR
AR9P724-(1)(2)
AR30VPR, VPL
Note 1: The values of code (1) and (2) above represent the Legend
below to be printed on the Legend plate
Type
Code (1), (2)
Letter height
Blank
00
EMERGENCY STOP
5A
5 mm
Note 2: These Legend plate are pasted on the product.
Note 3: The Legend plate is yellow and the Legend
text
is
black
[Unit: mm]
ø60 *
1
ø23 *
2
Thickness: 0.35
*1
: AR9P723: ø80
*2
: AR9P724: ø31
AR22VQ
, VPR
ø30 mounting adapter
Type
AR9Y958
Application:
• This adapter allows you to
mount the switch on a panel of
ø30.5mm cutout in combination
with the operator of AR22VQ
and VPR (made of plastics, with
ring packing and tightening nut).
• The applicable panel thickness is
1 to 4.5 mm.
[Unit: mm]
ø30 mounting adapter
ø30 packing ø30 tightening nut
ø45
2.5
5.5
0.5
6
ø30
ø42.4
ø22.2
ø41
ø30.3
ø40
ø36.5
r max = 0.8mm
4.8
+0.2
mm
0
33
+0.5
mm
0
ø30.5
+0.5
mm
0
●
Applicable
connector
• Knockout holes at the top and bottom: M20, Pg13.5, or G1/2
• Knockout holes at the back: M14 or G1/4
Applicable panel cutout size
62
Screw diameter: M4
41
* Tightening torque for mounting screws :
1.6 to 2.0 N
s
m
