User Manual Fugoo XL Bluetooth Speaker model FSNA2 page 7 4/21/2015
Taking a call
If you take a call on your phone when it is connected to the speaker, you'll hear it ringing
through the speaker.
• Click the
(Action) button to receive (pick up) the call.
• Talk and listen through during the call.
• Click
+
or
–
to raise or lower the volume.
• Click
+
and
–
simultaneously to mute / un-mute the microphone.
• Click
to end (hang up) the call.
• If you have a call on hold, press
to switch switch back and forth between the two calls.
• Double-click
to end the active call and switch to the call on hold.
• Use your phone’s controls to transfer the call from the speaker back to your phone.
Voice Response mode
• While your phone or other device is paired to the speaker (and a call is not in
progress) hold
(Action) for one second. A tone sounds through the speaker to
activate a voice response service, such as Siri, Google Now, or Cortana.
• Speak voice response commands through the speaker’s microphone.
• Click + or
–
to raise or lower the volume.
• Click the
(Action) button) to cancel voice response mode.
Customization / other functions
Normal and Loud modes
• There are two loudness modes for your Fugoo XL Bluetooth Speaker.
Normal mode
is the default, and is designed for best overall sound with most types of music.
Loud
mode
boosts the maximum loudness level, and is ideal for playing music outdoors,
and in large rooms. Both modes employ dynamic realtime equalization to boost the
loudness of songs that have been recorded at lower volume levels.
• To switch from one mode to the other, start with the speaker off, then press and hold
the Action (O) button and press the power button. The speaker will turn on, and
announce which mode it's in.
Voice prompts and tones level
• There are three voice prompt and alert tone levels: Normal, Low and Off. Normal is
the factory default volume level
– the level you will hear when you first turn on your
Fugoo Bluetooth Speaker. The Low level is about 20% lower than the Normal level.
• To change the voice prompt and tone levels from Normal to Low, start with the
speaker off, then press and hold the
–
(volume down) and
+
(volume up) buttons,
then also press the
(Power) button for one second. The speaker will turn on, and
announce that voice prompts have been set to Low.
• Follow the same steps as above to change the level from Low to Off.
• Follow the same steps again to change the level from Off to Normal.