User Manual Fugoo XL Bluetooth Speaker model FSNA2 page 5 4/21/2015
Powering on your Fugoo XL Bluetooth Speaker
•
Click the
(Power) button momentarily to power the speaker on.
• When the speaker runs from battery power, it will power itself off after a period of inactivity,
unless the Power Save feature is Off.
(See the Power Save Mode section for further detail.)
• Hold the (Power) button for one second to power the speaker off.
Connecting your speaker to smartphones and other devices
You can connect to your Fugoo XL speaker either through its audio input jack or
through a Bluetooth wireless link. Only one of these inputs can be active at a time.
Connecting through an audio cable to the audio input jack
• Connect one end of the supplied 3.5 mm audio cable to your speaker's audio input
jack, then connect the other end to the headphones jack of your audio device.
• The LED glows blue and a voice prompt says, “Disconnected. Bluetooth off.
Connected”.
• Plugging an audio cable into the speaker's audio input jack turns off the Bluetooth
wireless link, to save power and maximize battery life.
Pairing and connecting with another Bluetooth device
1. Make sure that a 3.5 mm audio cable is
not
connected to the speaker's audio input.
2. Place your Fugoo XL Bluetooth Speaker and your other Bluetooth device
within 33 feet (10 meters) of each other.
3. Turn the speaker and the other device on.
4. Hold the
(Bluetooth) button for three seconds. The LED blinks blue and red
repeatedly. If voice prompts are enabled, the speaker says,
“Pairing mode.
Use the Bluetooth settings
of your device to connect.” The speaker will
remain in pairing mode for three minutes, or until it pairs with your device.
5. On your other Bluetooth device, turn on Bluetooth, which will allow it to discover
the speaker. (See the Bluetooth settings information for your device.)
6. Select 'Fugoo XL Speaker' on your Bluetooth device.
7. Wait briefly for the speaker to discover your Bluetooth device. If voice prompts
are enabled, the speaker will say, "Pairing successful
” and “Connected”.
If you hear "Pairing is unsuccessful. Please try again." Try pairing again.
If you are using an iPhone or an iPad that has been previously paired to the
speaker, and all Bluetooth pairings have been cleared, it may be necessary
to 'Forget this Device', as follows:
1. Tap Settings.
2. Tap Bluetooth.
3. Tap the
icon to the right of 'Fugoo XL Speaker'.
4. Tap 'Forget this Device'.
5. Tap 'Forget Device'.
As long as the speaker is in pairing mode, the iPhone should find the speaker
again, and pair with it.