User Manual Fugoo Bluetooth Speaker model FSNA1 page 9 9/18/2015
Customization / other functions
Normal and Loud modes
• There are two loudness modes for your Fugoo Bluetooth Speaker.
Normal mode
is
the default, and is designed for best overall sound with most types of music.
Loud
mode
is quite a bit louder, and is ideal for playing music outdoors, and in large
rooms. Both modes employ dynamic realtime equalization to boost the loudness of
songs that have been recorded at lower volume levels.
• To switch from one mode to the other, start with the speaker off, then press and hold
the Action (O) button and press the power button. The speaker will turn on, and
announce which mode it's in.
Voice prompts and tones level
• There are three voice prompt and alert tone levels: Normal, Low and Off. Normal is
the factory default volume level
– the level you will hear when you first turn on your
Fugoo Bluetooth Speaker. The Low level is about 20% lower than the Normal level.
• To change the voice prompt and tone levels from Normal to Low, start with the
speaker off, then press and hold the
–
(volume down) and
+
(volume up) buttons,
then also press the
(Power) button for one second. The speaker will turn on, and
announce that voice prompts have been set to Low.
• Follow the same steps as above to change the level from Low to Off.
• Follow the same steps again to change the level from Off to Normal.
Power Save mode On / Off
The speaker can shut itself off to conserve power, after a period of inactivity
– meaning
no button presses, and no audio playback. Power Save mode can be toggled on and off
by holding the
–
(volume down) button while turning the speaker on with the (Power)
button. The default state is on.
If Power Save mode is on, then the speaker will shut itself off as fol
lows…
If the speaker is
not connected
to a source device and is
not plugged into a power
source
, the speaker turns off after
15 minutes
of inactivity.
If the speaker is
not connected
to a source device and is
plugged into a power source,
the speaker turns off after
30 minutes
of inactivity.
If the speaker is
connected
to a source device and is
not
plugged into a power source,
the speaker turns off after
1 hour
of inactivity.
If the speaker is
connected
to a source device and is
plugged into a power source,
the speaker will not shut off automatically.
If Power Save mode is off, then the speaker will remain on until you turn it off by pressing
the (Power) button for one second
Resetting the speaker
• It the speaker becomes unresponsive, or behaves differently than you believe it
should, try resetting it. Hold the
(Bluetooth) and
(Action) buttons for ten
seconds. This will reset the speaker, without clearing its pairing list.
• The speaker can be reset whether it's on or off.
