background image

35

FTSPARK

ProductID

Identifies the product that has sent the 
message. The lower the ProductID the higher 
is the priority in the CAN bus. In the network 
two devices that are the same type of product 

ProductID (15 bits)

Bit 14 to 5 (10 bits)

Bits 4 to 0 (5 bits)

ProductTypeID

Unique identifier

Each product that wants to send data to the 

CAN bus must have a unique identifier. Devices 

that will only receive data from the CAN bus 
doesn’t need to have a unique ID.

The ProductIDs are divided in priority ranges:

• 

Critical priority:    0x0000 to 0x1FFF

• 

High priority:       0x2000 to 0x3FFF

• 

Medium priority:  0x4000 to 0x5FFF

• 

Low priority:        0x6000 to 0x7FFF

A list with all the possible ProductTypeIDs is 
presented later in this document.

DataFieldID

Identifies the type of data structure that is being 

sent in the CAN FRAME -> DATA FIELD. There 
are 4 possible data layouts:

• 

0x00: Standard CAN data field

• 

0x01:  Standard  CAN  data  field  coming 

from/going to a bus converter.

• 

0x02: FTCAN 2.0 data field

• 

0x03: FTCAN 2.0 data field coming from/

going to a bus converter.

10.3 IDENTIFICATION

Each product that wants to send data to the 

CAN bus must have a unique identifier. Devices 

that will only receive data from the CAN bus 
don’t need to have a unique ID.

IDENTIFICATION (29 bits)

Bits 28 to 

14 (15 bits)

Bits 13 to 

11 (3 bits)

Bits 10 to 0 

(11 bits)

ProductID

DataFieldID

MessageID

CAN FRAME

29 bits

0 to 8 bytes

IDENTIFICATION

DATA FIELD

10.1 Physical layer

CAN 2.0B extended mode
Rate: 1Mbps

10.2 Features

In this document we will approach the  
implementation of a custom protocol (FTCAN) 
running on top of a CAN 2.0B physical layer. 
One main rain feature of the FTCAN protocol is 
to provide  a means to segment a large stream 
of data into  many smaller CAN packets. We will 
consider a  CAN FRAME as indicated below:

(two O2 sensors for example) cannot have the 
same ProductID. In order to differentiate two 
products of the same type the ProductID bits 
are divided as show below.

Содержание FTSPARK 1500mJ













































Отзывы: