Fuel Fitness FE44, Руководство пользователя

Страница: 15 / 24

FE 44 ELLIPTICAL
13
ENTERING A PROGRAM/CHANGING SETTINGS
MAINTENANCE MENU IN CONSOLE SOFTWARE
a program and begin customizing the settings. If you want to workout without entering new settings,
then just press the Start key. This will bypass the programming of data and take you directly to the start
of your workout. If you want to change the personal settings, then just follow the instructions in the
Message Window. If you start a program without changing the settings, the default settings will be used.
Note:
Age and Weight default settings will change when you enter a new number. So the last Age and
use the elliptical you will not have to enter it every time you work out unless either Age or Weight has
The console has built in maintenance/diagnostic software. The software will allow you to change the
for example. To enter the Maintenance Menu (may be called Engineering Mode, depending on version)
press and hold down the Start, Stop and Enter keys keep holding the keys down for about 5 seconds
and the Message Window will display “Engineering Mode”. Press the Enter button to access the menu
below. Press the Level UP/DOWN keys to navigate the menu.
A. Key Test - Will allow you to test all the keys to make sure they are functioning
B. Display Test - Automatically tests all LCD’s
C. Functions - Press Enter to access settings, use Level UP/DOWN keys to scroll
I. ODO Reset - Resets the odometer
II. Units - Choose from English(Imperial) or Metric display readings
IV. Motor Test - Continually runs the tensioning gear motor
V. Manual - Allows stepping of the gear motor
D. Security - Allows you to lock the keypad so no unauthorized use of the machine is allowed. When the
child lock is enabled, the console will not allow the keypad to operate unless you press and hold the
Start and Enter buttons for 3 seconds to unlock the console.
E. Factory Set
F. Exit - Select to exit Maintenance Menu