AVENGER Elliptical
10
Step 3. Handle Bar Assembly
1. Install the Lower Handle Bar (L) (9) in the left shaft of Console Mast(11) and the Lower
Handle Bar (R) (10) in the right shaft of Console Mast(11), and secure them with 2pcs of
5/16" × 15m/m Hex Head Bolts (74) and 2pcs of Ø8.5 × 26m/m × 2.0T Flat Washers(104) by
using 12m/m Wrench(116)
2. Release rod end shafts (18) which are on left and right connecting arms. Connect the
connecting arm with lower handle bar and secure with rod end shafts (18) and the screw by
using Combination M5 Allen Wrench & Phillips Head Screw Driver (118).
3. Secure 2pcs of slide wheel cover (65) on left and right pedal arm(5) with 4pcs of M5 × 15m/m
Phillips Head Screws (82) by using Combination M5 Allen Wrench & Phillips Head Screw
Driver (118).
