Fubag WHS 190 DC, Руководство оператора

Страница: 4 / 27

- 3 -
- The power generator may not be operated without the sound absorber.
- The power generator may not be operated without the air filter or with the air filter cover open.
- The generator's tank may not be refilled during operating.
- The tank may not be refilled when the power generator is hot.
- The power generator may not be cleaned and serviced when in operation; when hot.
- Always remove spark plug connector prior to commencing servicing and repair work.
- The power generator must be shut down when not required for periods longer than 30 days.
- The power generator must be stored in a dry enclosed room.
Safety peration welding o
- No
-
-
-
-
-
-
-
-
-
-
-
-
work of power station in a mode "welding" and "generator" is forbidden. Before carrying out
of welding works disconnect all consumers from sockets.
It is highly recommended always to follow the safety rules. Wear protective clothes and special
means to avoid injuries to eyes and skins.
Use the welding mask or special protective glasses while working with the welding machine.
Only by viewing through the filter lens on the welding mask your eyes are secured by your
operation.
Prevent the sparks and spatter from harming your body.
Under no circumstance allow any part of your body to touch the welder's output bipolarity (torch
and work piece).
Fumes and gases produced when welding are hazardous to health. Make sure to work in
places where there are exhaust or ventilation facilities to keep fumes or emissions away from the
breathing zone.
Please remember to keep arc rays away from the other nearby people when welding. This is
only due to the interference from arc rays.
There will be high temperature when welding work piece, so please don't directly touch on it
No welding for the container loaded inflammable or explosive materials.
Welders possible have electromagnetism and frequency interference, so keep away people
with heart pace or the articles which can be interfered by electromagnetism and frequency.
Taking welder power for pipe unfreezing device will be prohibited.
Check is needed from time to time to make sure the welding cable is in good condition if the
welding machine is in frequent use. Check at least once each month if the welder is in regular
use. It is necessary to check when the welder is in mobile use.
Electrode must be taken down from holder when no welding.
www.fubag.ru
O m perator's anual