Temperature and Humidity Sensor
Page 12/15
700-THS3 Rev. 6 -05 May 2015
Figure 3-5: Regular Logging
2)
The Logging intervals screen will be displayed. If there are already logging intervals set up
they will be seen here. Logging intervals created through the Data functions, as described here, are
displayed in blue. Logging intervals created using the In-line Logging feature are displayed in green.
Figure 3-6: Logging Intervals
3)
Press the Add icon, then the Edit icon. Set the desired logging interval and offset times.
NOTE:
Logging intervals should not be less than the input measuring interval.
4)
Scroll down the list of the Available Variables. Press on ATC and then use Move Right Arrow to
shift it to the Logged Variables field. Do the same with the RH variable.
