FTS SDI-PT-KEL, Руководство пользователя

Страница: 14 / 22

700-SDI-PT-KEL-Man Rev 4 06 Jan 2020 11/19
3.5.1 Acknowledge Active
This command queries whether a sensor is present on the SDI bus at the specified address.
3.5.2 Send Identification
This command is used to query sensors for their SDI-12 compatibility level, model number, and
firmware version number.
Example response: 213KellerAG PR36X 0020000000000001
3.5.3 Change Address
This command changes a sensor’s SDI address.
3.5.4 Address Query
This command requests the address of the SDI sensor.
NOTE: only one SDI device should be connected to the bus when using this
command; problems arise when several devices respond on the same bus.
STRING NOTE
Cmd ?! Request the (single) device on this bus to report its
address
Resp a The address of the device
STRING COMMENT
Cmd a! request the device at address a to confirm it is active
Resp a a device is present at address a
STRING COMMENT
Cmd aI!
Resp a13KellerAGmmmmmmvvvxx...xx
a - the sensor address
13 – SDI-12 version number
KellerAG – 8 character vendor
identification,
mmmmm - the sensor model number
vvv – 3 character sensor version
xx..xx – Serial number, max 13 characters.
STRING NOTE
Cmd aAb! a = current address
b = new address
Resp b response confirms new address