700-RAOS-Man Rev 5 24 Feb 2020
Page 9/31
1.9
CAMERAS
The fitted camera(s) can monitor the visible and near IR spectrums, permitting both a day and a
night mode. The Infrared camera can be shipped with one of two modes which must be factory
configured prior to shipping. The default mode is Infrared only.
Three different camera models are available for operation with the RAOS:
Models
Panorama
Infrared
Thermal
Field of View
187
4-59
10
Modes
Day and Night
(automatically converts)
Day and Infrared Option
(automatically converts)
or
Infrared Only Option
Thermal
The cameras connect to the system via Ethernet (TCP/IP) and are powered over the Ethernet port
(PoE). They can be configured on-site with the FTS360 CONFIG APP or remotely through FTS360.
Users are able to view live streaming video while on site through the FTS360 Config App.
1.10
INFRARED CAMERA SAFETY
The IR camera is classified as Risk Group 1 (low risk) in accordance with IEC-62471. When the IR
LEDs are active, their emissions can cause an infrared radiation hazard for the eye over a period of
time at close range. Since light provided from the IR LED is outside of the visible range, it is not
possible to see if the IR LED is active; therefore, if working at close proximity to the camera, use
appropriate shielding or eye protection. Refer to Figure 1-5.
RISK OF EYE INJURY!
Do not look directly into the IR LED at close range.
See safety notice
