FTE MAX S400 HD PLUS, Быстрое руководство по установке

Страница: 23 / 40

PAG.23
rev 1.1
4.4. SINGLE SEARCH
When you enter the “Single Satellite Search” menu you can see
a window like OSD 30:
You can edit the following items:
1. Satellite: Press [
] to switch Satellites or press [OK] to
enter satellite list to select directly.
2. In the “FTA Only” item, press [
to select to scan only
free channels or even scrambled channels. If you select “Yes” it
will scan free channels only.
3. In “Scan Channel” item, press [
] to select to scan TV
+ Radio Channels, just TV channels or just Radio channels.
4. Network Search: If you select this option as “No”, the receiver
will search the selected Satellite. In case you select “Yes”, the
NIT (Network Identifi cation) will be identifi ed and the receiver
will automatically search all the TP of this network.
5. In “Scan Mode” item you can select “Auto Scan” to blind
scan or “Preset Scan” to scan all preset transponders.
6. Move the highlight to “Search” and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
are listed. You can stop the scan with [Exit] and save the so far
found channels (OSD 31).
4.5. MULTI SEARCH
Entering in this menu, you can make a search in all the
satellites of the list confi gured in the “Satellites list” option. The
confi guration options are the same as in the individual search
section.
After selecting Antenna Setup another window will be opened
(OSD 32).
You can edit the following items:
1. Satellite: Press [OK] to enter satellite list.
2. In the “FTA Only” item, press [
to select to scan only
free channels or even scrambled channels. If you select “Yes” it
will scan free channels only.
3. In “Scan Channel” item, press [
] to select to scan TV
+ Radio Channels, just TV channels or just Radio channels.
4. Network Search: If you select this option as “No”, the receiver
will search the selected Satellite. In case you select “Yes”, the
NIT (Network Identifi cation) will be identifi ed and the receiver
will automatically search all the TP of this network.
5. In “Scan Mode” item you can select “Auto Scan” to blind
scan or “Preset Scan” to scan all preset transponders.
6. Move the highlight to “Search” and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
are listed. You can stop the scan with [Exit] and save the so far
found channels (OSD 33).
INSTALLATION
OSD 31
OSD 32
OSD 34
OSD 33
ENGLISH