FTE Maximal TWSQ 310 CI, Руководство пользователя

Страница: 13 / 20

User’s manual · TWSQ 310 CI
- 12 - TWSQ 310 CI version_en_1.0 FTE maximal
- Deactivate: No actions will me made in the CAM.
- Update: When it is detected that the decryption of the CAM
has been lost, the rights will be sent systematically until the
decryption gets back.
- Reset: As soon as the loss of decryption of the CAM is
detected, a reset will be made.
- Both: Once the loss of decryption of the CAM is detected, the
rights will be sent several times until the decryption gets back. In
cases where it does not get back the module will make a reset
of the CAM.
- CAM Reset after: It makes a reset of the CAM alter a set period of time.
Options: 0, 5 min , 10 min, 15 min
- CI daily reset: By activating this option we will be able to make a daily
reset of the CAM.
- CI daily reset time: Time when the CAM resets in case the “CI daily
reset” option is activated.
- Activated slots: It allows selecting the CAM modules that should get a
reset, in case the “CI daily reset” option is activated.
PRO 201
Note: From PRO 201 programmer you can only carry out the programming of a single module, in order to carry
out the programming of several modules at the same time you have to use a mediaMAX EVO or mediaMAX
MINI series field strength meter.
When you connect the PRO 201 programmer, it will proceed to recognize the
module and to show the main menu.
In the main menu are shown the different options for configuring the
transmodulator.
We have to use the “Up” and “Down” buttons of the keyboard in order to move to
the different options, and to get into the submenus we have to press “OK” button.
1. Manual
Inside the “manual” menu there are specified the different options for setting up the input, output and modulation
parameters.
Note: It will allow you to choose between two units with an only device
connected to the programmer (Unit 1(Mux 0) or Unit 2 (Mux 1)).
1. This field shows the type of parameter that is selected at the moment.
Options: Input Sat, Out Cab, Out TV.
2. This field shows the parameter that is selected. In order to move
around the different options we have to use the “Up” and “Down” buttons
of the keyboard..
Click on OK to edit the selected parameter and
Right/Left for changing it. Once it is configured press OK.
Satellite input ( Input Sat)
In these options you will be able to configure the input parameters of the satellite
signal:
- L.O. freq (Local oscillator): Selection of the local oscillator that you wish to use:
FI, KU, C, K9750, K10000, K10600, K10700, K10750, K11250, K11300,
K11325 .
TWSQ310CI *Input Sat
RF level: 013
>LO Freq: LO KU
Freq: 11509
1
2
TWSQ310CI
>Manual< Config
Auto
TWSQ310CI *Input Sat
Symbol Rate: 27500
>Antenna: 13V+22k
Diseqc: NONE
TWSQ310CI
>Mux 1<
Mux 0