FTE Maximal TWSQ 310 CI, Руководство пользователя

Страница: 11 / 20

User’s manual · TWSQ 310 CI
- 10 - TWSQ 310 CI version_en_1.0 FTE maximal
- Remove all services: It allows removing all the services included in the
multiplex.
- Modify LCN: The LNC function allows assigning automatically a
predetermined position to each one of the services of the multiplex. This
function will allow the users who have a receiver with LNC support to make the
ordination of channels automatically.
Note: If in the existing installation there are already services that have
LNC system, you will have to configure the position of the module
services in order to avoid conflicts with other net services.
- Bandwith limitation: It allows selecting the % of the capacity of the output
channel.
- Auto service addition:
- On: It selects the services automatically when an input carrier is tuned
and when the list of selected services is empty. The receiver will have
this state by default.
- Always: It selects the services automatically every time a new input
carrier is tuned. This state is only recommended to be used for making
test in the module.
- Off: The automatic mode is deactivated; the services have to be
manually selected.
- Advanced settings:
- Network: It allows making the adjustment of the identification
parameters of the multiplex.
- TS ID: Transport Stream identification value. It is
recommended to configure a value different from TS ID for
each one of the output multiplex configured.
- Net ID: Net identification value
- Original Net ID: Original net identification value
- Network Name: Name associated with the net.
- Tables: It allows modifying the value of the following
information tables of the DVB, NIT, SDT and PAT services.
- Services:
- Change service name: It allows changing the name of the
service manually. In order to do so, please choose the service
in the first line and then write the new name in the second line.
Then you have to press “modify” in order to save the changes.