FTE Maximal eXtreme HD mini, Быстрое руководство по установке

Страница: 21 / 46

PAG.3
rev 1.0
e
n
g
li
s
h
example 1 – Basic System
example 2 – DISEqC switches
QuiCk inStAllAtion Guide
Follow next steps for the correct installation of this receiver.
SteP 1: outPut Video ConfiGurAtion
In order to correctly visualise the reception signal on TV, you must configure the format and mode of
the video output.
- Video output: In order to get a correct visualization of the image we recommend:
1. In case you make the connection to your Tv by the means of A/V jack outputs, select “SD” video
output
2. In case you make the connection to your Tv by the means of “HDMI” output, select “HD” video
output.
- Video resolution. You will be able to select among the following formats:
1.In case SD video output is selected, you will be able to select AUTO, PAL or NTSC format.
2.In case HD video output is selected, you will be able to select among the following formats: AUTO,
TV,
480I, 480P, 576I, 576P, 720P_50, 720P_60, 1080I_25, 1080I_30, 1080P_50, 1080P_60,
1080P_25, 1080P_30 or 1080P_24.
SteP 2: ConneCtionS
The coaxial cable, with satellite signal, must be connected to the “IF IN” connector. The HDMI, SCART
or A/V jack connectors must be connected to the TV set.
Screw the WiFi antenna on the USB adapter. Make sure it is well screwed as far as it will go, to not
lose sensitivity.
Connect the WiFi Dongle (*) in the “USB” port in order be able to open the internet menu.
Turn the WiFi antenna orientating it vertically upwards.
Depending on the type of installation, the receiver should be connected and configured following next
examples.
QuiCk inStAllAtion Guide
(*) The WiFi Dongle stick is not included. It must be compatible with Ralink RT5370.