FSR SX, Руководство пользователя

Страница: 6 / 16

4
FORK SETUP INFORMATION
WARNING! SX and SX Trail frames are compatible ONLY with single crown forks
that have travel of 7.1” (180mm) or less. Use of different styled forks or forks with
longer travel may result in catastrophic failure of the frame which may result in
serious personal injury or death.
SEATPOST SETUP INFORMATION
100mm
Minimum Seatpost
Insertion Guide Hole
SEATPOST MINIMUM INSERTION: To prevent
damage to the frame, it’s important to have a minimum
amount of seatpost in the seat tube.
Aluminum frames:
If you cannot see the seatpost tube through the seat tube
hole, your seatpost is too far extended. If a greater saddle
height is required, replace the seatpost with a longer one.
FRONT DERAILLEUR POSITION
9-SPEED FRONT DERAILLEUR
Derailleur
position:
LOW
Derailleur
position:
HIGH
Stumpjumper FSR 26” Enduro
Stumpjumper FSR 29er Safire
Epic
Epic 29er
Era
SX Trail
SX
The front derailleur chart is a starting point. Different front derailleurs may require a
different mounting position. Adjust position according to the front derailleur to achieve
proper positioning over the chainring.
10-SPEED FRONT DERAILLEUR
SRAM DMD front derailleurs: no adapters necessary. Choose the derailleur based on
the desired chainring size.
Shimano DMD front derailleurs:
Choose the appropriate derailleur based on the
desired chainring size.
„
XTR FD-M985-E: 38/40t chainrings
„
XTR FD-M985-E2: 40/42/44t chainrings (40t position will not work on models
with 2nd generation DMD mount. For these bikes, use FD-M985-E)