FSR SX, Руководство пользователя

Страница: 10 / 16

8
SHOCK SETUP
SETTING SAG
MODEL SAG (%) SAG (mm)
SX Trail I / II 25-30 16-19
Proper sag should be achieved with one turn of preload on the spring. More then two turns of
preload will require a higher spring rate or not enough sag will require a softer spring rate.
See spring rate chart below for additional information or refer to the shock manual.
SETTING REBOUND
Rebound damping (red knob) controls the rate at which the shock returns after it has
been compressed.
„
Clockwise for slower rebound (slow speed, bigger hits).
„
Counter-clockwise for faster rebound (higher speeds, small bumps, more traction).
SETTING THE IFP (BOOST VALVE)
DHX RC4 ONLY:
The IFP (Internal Floating Piston) sets up the overall rate of
compression damping.
Pressure range of IFP: 125 to 200 PSI.
„
Higher pressure: More bottom-out control
„
Lower pressure: Less bottom-out control
SETTING COMPRESSION
DHX RC4 / VAN RC: Low-speed compression damping (small blue knob) controls
slower suspension movement, which helps in pedaling efficiency and bike attitude.
„
Clockwise for a firmer platform and more efficient pedaling, greater resistance to
small and medium bumps, more harshness.
„
Counter-clockwise for a more active, supple reaction to terrain, less efficient
pedaling, less harshness.
„
Turn the compression adjuster knob to full firm and ride your bike for a while, then
gradually reduce compression until it starts to feel too soft and active for the terrain.
Gradually increase compression until the optimal setting is found for the terrain and
riding style.
DHX RC4: High-speed compression damping (gold dial under small blue knob)
controls faster suspension movement during events such as steep jump faces, flat jump
landings and square edge bumps.
„
Clockwise for more bottom-out resistance and less wallowing in the face of jumps.
„
Counter-clockwise for less bottom-out control and a more active shock.
„
High-speed compression can be adjusted in conjunction with the bottom-out
control dial to keep the high-speed compression damping resistance low while still
preventing bottom-out.
COIL SPRING RATE SPECIFICATIONS
BIKE MODEL SMALL MEDIUM LARGE
SX TRAIL II / I 450 500 550
NOTE: SX Frames use a Fox RP23 air shock, providing 100mm of travel. Please refer to
the setup steps from Fox Racing Shox.