FSR Compass Plus CP-100, Руководство пользователя

Страница: 56 / 163

56 CP-100 • User’s Guide
4. Operation
Using the Setup Menu
following illustration. For information about adjusting these inputs, refer to the “ Image
Adjust ” section on page 58.
Figure 4-20. Timing Adjust Menu — DVI Digital, NTSC, PAL (sample)
The following functions are available:
•
Auto Config — This function performs an automatic input configuration on the
selected analog source on Program. Auto Config is available for analog inputs
only.
When Auto Config is selected, the CP-100 finds the first and last pixel on each
edge of the selected input, and ensures (to the best possible extent) that the
entire image is visible. In addition, the system automatically phases the input to
determine the correct sampling phase.
•
Sampling — select this function to change the sampling for the selected input.
Available values are: Oversample and 1:1 (default). Please note:
T I M I N G A D J U S T
> A u t o C o n f i g
S a m p l i n g [ 1 : 1 ]
P h a s e A [ 0 ]
P h a s e B [ N / A ]
H T o t a l [ 8 5 8 ]
H P o s i t i o n [ 1 2 3 ]
H A c t i v e [ 7 2 0 ]
V T o t a l [ 5 2 5 ]
V P o s i t i o n [ 3 6 ]
V A c t i v e [ 4 8 6 ]
Important The Timing Adjust Menu does not appear in the menu tree if
the analog input is being undersampled for the following
resolutions:
•
1920x1080p@60 (173.0 MHz)
•
1920x1200p@60 (193.25 MHz)
•
2048x1080p@60 (183.75 MHz)
Tip Ensure that there are non-black pixels around the extreme
edges of your active video, in order for the image to be
properly sized by the
Auto Config function. For example, if
you use a Windows desktop with a high luminance
background, the
Auto Config function will be accurate. If, on
the other hand, you use a desktop image with a black border,
the image will not be properly sized.
Note This function is identical to the Auto Config function in the
Image Adjust Menu .