Fortron Source (Europa) GmbH
Carl-Friedrich-Benz-Straße 13, 47877 Willich, GERMANY
Tel: +49 2154 894 012-0
POWER NEVER ENDS
2.2 Installation and Setup with UPS
Unpacking & Inspection
1.
Remove the battery pack from the packing.
Note: The battery pack is very heavy, be cautious when unpacking and lifting the
unit to avoid injury.
2.
Check the inside package
Battery pack unit
Battery connection cable x 1
Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the battery bank and extend the life of the
batteries. Please follow the instructions below:
1.
Keep at least 20cm (8 inches) clearance from the rear panel of the unit
from the wall or other obstructions.
2.
Do not block the air-flow to the ventilation openings of the unit.
3.
Please ensure the installation site environmental conditions are in
accordance with the unit’s working specifications to avoid overheat and excessive
moisture.
4.
Do not place the unit in a dusty or corrosive environment or near any
flammable objects.
5.
This unit is not designed for outdoor use.
3. Battery Installation
If your battery pack is not installed with batteries, please follow proper
procedure to put batteries inside of unit.
NOTE: MAKE SURE THAT THE BATTERY PACK IS DISCONNECTED FROM THE
UPS BEFORE PERFORMING THE FOLLOWING SEQUENCE OF OPERATIONS.
