FSN FS-E2101D, Инструкция по эксплуатации

Страница: 22 / 44

22
8/2021
On Screen Display (OSD) Menus
FS-Y1901D
FSN display monitors come equipped with a rich set of features for system set-up, image
adjustments, and screen layout control. These features are managed through the On Screen
Display, or OSD. Some options presented in the OSD are contextual and vary depending on the
active input signal. See the Controls section for a complete description of each OSD button.
1. Enter the OSD
To activate the OSD menu, press the MENU button on
the front of the display monitor. To close the OSD menu,
press the menu button to exit from the main menu or a
sub menu.
2. Pick a Main Menu Category
After entering the OSD, use the UP and DOWN buttons on the front of the display monitor
to navigate to a main menu category: ADJUST, COLOR TEMP, IMAGE, SETUP, PIP.
3. Pick a Submenu Category
After entering the desired main menu category, press the
+
button to enter the submenus
associated with the selected main menu. Use the UP and DOWN buttons to navigate
to the desired submenu, then adjust as needed with the
+
and
-
buttons. Select the MENU
button to exit from the submenu or main menu.
On Screen Display (OSD) Menus
Main Menu
Categories
Sub Menu
Categories
Sub Menu Value or
Setting
Video Source
Information
Submenus under the ADJUST menu
(variable by signal type)
1. BRIGHTNESS Increases or decreases the brightness. (Range : 0~100)
2. CONTRAST Increases or decreases the contrast. (Range : 0~100)
3. CLOCK Increases or decreases the sampling frequency. (Range : 0~100)
4. SHARPNESS Adjusts the sharpness of video image (Range : 0~100)
5. PHASE Increases or decreases the phase level. (Range : 0~100)
6. SATURATION Changes the tone of color. (Range : 0~100)
7. COLOR Changes the richness of color. (Range : green 0~50, red 0~50)
8. BACKLIGHT Adjusts backlight dimming level. (Range : 0~100)
9. AUTO ADJUST fi ts to the most appropriate screen on the D-SUB Analog / RGBs signal.