www.fsm.ag
+49 7661 9855 0
[email protected]
FSM AG
Erich-Rieder-Straße 2
D-79199 Kirchzarten
4|4
5.6.3 MODBUS address
This sub-menu can be used to configure the device for being used with MODBUS. Use the arrow buttons to set the corres
-
ponding MODBUS address and confirm your selection by using the OK button.
5.7 Code
Here you can specify a new code for the device. The arrow buttons can be used for entry purposes. Confirm the new code
by using the OK button.
5.8 Programme version
Confirm by using the OK button, in order to have the current software version displayed.
5.9 Device version
Confirm by using the OK button, in order to have the current device version displayed.
6. Command value level
Pressing the S button will bring you to the command value level. Here the current command value of the device is dis
-
played (output signal). The arrow buttons can be used to get access the corresponding command value allowing you to
change it.
6.1 Changing the command value
Before being able to enter a command value a second code has to be entered into the device. At the time of delivery con
-
firm the displayed code by using the OK button.
6.2 Entering the command value
The arrow buttons can be used to enter the corresponding command value now. This command value simultaneously cons
-
titutes the output signal of the sensor (current or voltage). Confirm the set value by using the OK button.
