FSLaser 36x24, Руководство по установке и настройке

Страница: 16 / 42

[9]
Part 2: Getting Started
Setting Up Your Laser System
Setup of the ProLF laser usually takes less than 1 hour, but there are a few things you will need
to take care of before it arrives:

Purchase distilled water for cooling the laser. Your laser comes with a pump and
tubing for circulating the water through the tube and back into a reservoir.
Please
make sure to only use distilled water—neither filtered nor de-ionized water will work
and tap water will cause deposits that can destroy your tube and void the warranty.

Purchase a container to act as a reservoir for the distilled water. Be sure to check the
container regularly to ensure that the water remains clean and deep enough to cover
the pump.
Once your laser has arrived, you will need to do the following to set up your machine:

Remove the laser and accessories from the box

Connect the exhaust, cooling and air assist systems

Remove the zip ties (3) that secure the drive belts during shipping

Connect electrical power

Connect the laser to your computer using an Ethernet cable

Install the latest version of RetinaEngrave (download information can be found in the
shipping box)
Notes:

Please do not throw away the laser’s box and packaging, you may need it later.