FSL3D Phoenix Touch, Руководство пользователя

Страница: 35 / 45

35
Refilling
● Pause the print.
● Pour resin directly into the tray. Do not exceed the maximum fill line as it will spill and
damage the printer while printing.
Spills
● Clean up immediately before it hardens.
● To clean printer body use paper towels or clean microfiber cloths.
● IPA may be used to remove resin on surfaces and tools.
​ Do not ​ use IPA on any printer
component.
Storage
● Always store the resin in opaque bottles or under the printer cover. Natural light will cure
the resin.
Reusing
● You may reuse the remaining resin in the liner, but do not return it to the original bottle
since it may result in contamination.
● Filter used resin through paint filters to remove small cured bits of resin.
● Store resin in a lightproof container
Disposal
● Cleaned parts and cured resin may be thrown away as normal waste. They are
non­recyclable.
● Resin in liquid form must be cured before disposal. Place the resin in a clear plastic
bottle or bag and use sunlight or a UV lamp to cure.
[Main Menu]