FSA GT1-70DI, Руководство пользователя

Страница: 8 / 10

2. Check that the system is
connected as per the schematic
diagram on the rear of this
manual.
Hot Water has been run through
the filter Reverse Osmosis units are
designed for cold water only. If
you accidentally run hot water
through the membrane for a
short period of time, it may still
undamaged. What will happen in
the pore size in the membrane
will expand and allow more
contamination through. Run the
unit on cold water for 15 minutes
and test to make sure there is no
issues.
Replacement Filters & Parts
Filter Cartridges:
GT6-21S Inline Activated Carbon Filter (Pre-Filter) 6 Months
GT5-12S-350 Refill bag of DI Resin As Required
GT13-59-ALP 50GPD Reverse Osmosis Membrane 1 – 4 years
Fittings: (TDS Testing Required)
GT10-22LS ¼” Male x ¼” Tube Fitting
GT10-23LS ¼” Male Elbow x ¼” Tube Fitting
GT10-2LS 1/8” Male x ¼” Tube Fitting
GT10-13LS 1/8” Male Elbow x ¼” Tube Fitting
Valves:
GT25-3S1/4 Kitchen Tap Diverter Valve ¼”
GT25-15 Male x Male Thread Adapter 22 – 24mm
GT13-1S 200CC Flow Restrictor ¼”
Housings:
GT8-31 1812 Membrane Housing
Diagrams
Continue Over Page