FS M6500 Series, Руководство по настройке

Страница: 168 / 185

M6500 Series NE Configuration Manual
167
Figure9-62 History Performance Parameters of Optical Power
9.3.1.2. View History Monitoring Information of Optical Power
15minutes and 24hours of optical power history data operation and display are the same form. Here we take
15-minute optical power history monitoring point as an example. Choose the appropriate network elements,
slots, ports and monitoring cycles through the screening box above the menu, and then select the time interval,
performance monitoring point and parameters which need to be monitored in the right menu. The maximum
optical power, minimum optical power and average optical power can be all selected or only select one or two
of them to check.After that, click Apply button on the lower right corner. From the graph, we can see the trend
of the refraction chart of the maximum, minimum and average optical power. The ordinate represents the value
of the optical power, and the abscissa represents the time. Data which has been read for more than 15 minutes
will be automatically transferred from current statistics to history statistics.
Figure9-63 15-Minute Chart Data of Optical Power
History performance statistics of optical power also show history data in tabular form. Click on the table, the
interface as shown in the figure below appears: