EN
8
Assemble FOSC Housing and Fix FOSC
1. Put desiccant into FOSC.
2. Put FOSC cover on base directly.
3. Install plastic hoop between FOSC cover and base, tighten hoop locking system, which is to be
fixed by hoop fixing bolt then.
4. FOSC installation:
①
Aerial application: fix metal hoop and transom to the pole. Please refer to above Drawing;
②
Wall mounting application: fix the bracket on the wall with bolt. (metal hoop is not required.)
③
Underground application: metal hoop is not required.
Online Resources
Download
Help Center
Contact Us
https://www.fs.com/products_support.html
https://www.fs.com/service/fs_support.html
https://www.fs.com/contact_us.html
NOTE:
1. Pay attention while installing plastic hoop.
2. The specification of bolt for fixing the bracket is M8.
Bracket (metal)
Base
Heat shrinkable
fixing sleeve (single)
Entry/exit tube
Hoop (left)
Hoop locking system
Hoop fixing bolt
Label
Hoop (right)
Fiber
Hoop (metal)
Transom (metal)
FOSC cover
