Configuring the Access Point
Configuring the AP Using the Web-based Interface
Step 1: Connect the computer to the business port of the AP using the network cable.
Step 2: Set the IP address of the computer to
192.168.1.x
. (“x” is any number from 2 to 254.)
Step 3: Open a browser, type
http://192.168.1.1
,
and enter the default username and password,
admin/admin
.
Step 4: Click
Login
to display the web-based configuration page.
Access Point
Login
admin
*****
Simplified Chinese
OK
C ancel
I n t e r n e t P r o t o c o l V e r s i o n 4 ( T C P / I P v 4 ) P r o p e r t i e s
?
x
Validate settings upon exit
Adv anc ed ...
192 . 168 . 1 . 2
.
.
.
.
.
.
.
.
.
255
.
255
.
255
.
0
General
You can get IP s e t t i n g s assig ned aut oma t ic ally if y our net w or k
suppor ts this c a p a b i l i t y. O ther wise , y ou need t o ask y our net w or k
adm inist r a t or f or the appr opr ia t e IP se t t ing s.
Obtain an IP address automatically
Use the following IP address:
IP address:
Subnet mask :
Default gateway :
Obtain DNS ser ver address automatically
Use the following DNS ser ver addresses:
Preferred DNS server:
Alternate DNS server:
