background image

UHC-HD 

1-1 

1  Universal Holding Cabinet 

 

The Frymaster Universal Holding Cabinet (UHC-HD) developed and manufactured exclusively for 
McDonald’s, is a short-term holding device to extend the freshness of a wide variety of cooked 
products. The UHC-HD meets all McDonald’s standards for safety, efficiency, and cleanliness. 

 

1.1  Warranty Statement 

 

A.

 

Frymaster L.L.C. makes the following limited warranties to the original purchaser only for 
this equipment and replacement parts: 

 

1.1.1  Warranty Provisions – Universal Holding Cabinet 

 

A.

 

Frymaster L.L.C. warrants all components against defects in material and workmanship for a 
period of two years. 

 

B.

 

All parts, with the exception of fuses, are warranted for two years after installation date of 
cabinet 

 

C.

 

If any parts, except fuses, become defective during the first two years after installation date, 
Frymaster will also pay straight-time labor costs to replace the part, plus up to 100 miles/160 
km of travel (50 miles/80 km each way). 

 

1.1.2   Parts Return 

 

A.

 

All defective in-warranty parts must be returned to a Frymaster Authorized Service Agency 
within 60 days for credit. After 60 days, no credit will be allowed. 

 

1.2.3  Warranty Exclusions 

 

This warranty does not cover equipment which has been damaged due to misuse, abuse, 
alteration, or accident such as: 

 

Improper or unauthorized repair; 

 

Failure to follow proper installation instructions and/or scheduled maintenance 
procedures as prescribed in your MRC cards; 

 

Improper maintenance; 

 

Damage in shipment; 

 

Abnormal use; 

 

Removal, alteration, or obliteration of the rating plate; 

 

This warranty also does not cover: 
 

 

Transportation or travel over 100 miles/160 km (50 miles/80 km each way), or travel 
time over two hours; 

 

Overtime or holiday charges; 

 

Consequential damages (the cost of repairing or replacing other property that is 
damaged), loss of time, profits, use or any other incidental damages of any kind. 

 

Содержание UHC-HD

























Отзывы: