Frymaster UHC-HD, Инструкция по установке и эксплуатации

Страница: 21 / 24

UHC-HD
3-13
Capture Cabinet Menus/Configurations
The menu items and cabinet configurations in a cabinet can be captured and used to configure
cabinets with identical software setups. Follow the instructions below to capture the menus and
configuration from a cabinet.
1. Insert an empty flash drive in the
USB socket on the cabinet with
menus and configurations to be
copied.
2. Press the programming key.
3. Enter 759248 with the keypad.
4. Press OK.
5. The master control will display
Copy from UHC to
USB
.
6. Press OK.
7. The master control displays
Please
Wait
… as files are transferred to the flash
drive, changing to the number of files copied
when the process is complete.
8. Press OK.
9. Remove flash drive.
10. Cabinet returns to normal display.
Configure Cabinet with Menu/Configuration Captured on another Cabinet
1. Place a flash drive with a captured
menu/cabinet configuration into the USB
port of a cabinet to be identically
configured.
2. Press the programming key and enter
090709 with the keypad.
3. Press OK.
4. The master control will display
Reconfigure OK or
Cancel
.
5. Press OK.
6. The master control will display
Please wait…
as the files are updated, changing to the
number of files copied.
7. Press OK.
8. The cabinet will return to the original menu setting, changing row position displays to match
items introduced with the configuration transfer.
The configuration of a cabinet can be captured on an empty
flash drive for transfer to cabinets with the same software
setup.
A cabinet configuration can be transferred to multiple
cabinets with a captured configuration held on a flash
drive.
NOTE: Menu configurations captured to a flash
drive with the code routine described here
cannot be loaded to the cabinet like a Web-
created file. Use the code routine for those
files, the Web-based routine on page 3-11 for
Web-created files.