1 - 4
COMPUTER PROGRAMMING INSTRUCTIONS
1.
Enter the programming mode by pressing the Program Mode Switch
.
will appear in
the left display. If you enter the programming mode by mistake, press the switch again to exit
the programming mode.
NOTE
:
If you try to enter the programming mode while the computer
is cooking, the display will flash
.
2.
Press product buttons 1, 6, 5 and 0 in that order. Unless this code is entered, programming will
not be accepted. This is to prevent unauthorized persons from changing your current instructions.
3.
sp-r
(Setpoint) will appear in the left display. Any previously programmed setpoint will
appear in the right display. To change the setpoint, enter the desired setpoint temperature using
the number keys. The highest programmable setpoint is 375ºF (191ºC). Press the Program
Mode Switch
to lock in the new setpoint (or the old setpoint, if it was not changed).
NOTE:
On split-pot fryers,
sp-R
indicates the setpoint for the right frypot. After the right
frypot setpoint has been programmed,
sp-L
(left frypot setpoint) will appear in the left display.
Enter the setpoint for the left frypot in the same manner as for the right frypot.
4.
selp
(Select Product) will appear in the left display. Press the product button to be
programmed (or press
to return to the normal operating mode). In full-pot fryers, any
product button, including L and R may be used. In split-pot fryers, product buttons L and 1-5
are used for the left frypot and buttons R and 6-0 are used for the right frypot.
5.
sens
(Sensitivity) appears in the left display. Any previously programmed sensitivity setting
appears in the right display. To change the sensitivity setting, enter the new setting and press
to lock it in. If the setting was not changed, pressing
accepts the previous setting. A chart
has been provided on page 1-5 to assist in choosing a sensitivity setting. It is meant as a guide
only and the settings may be changed to suit different needs.
6.
cooc
(Cook Time) appears in the left display. Any previously programmed cooking time will
appear in the right display. Pressing
will accept the current cooking time. To change the
cooking time, enter the new time using the Number keys. Press
to lock in the new time.
7.
sh_
(Shake Time) appears in the left display. If your product requires shaking during the cook-
ing process, set the number of seconds to cook before shaking using the number keys.
For example, entering “30” means the product needs to be shaken after it has been cooking for
30 seconds. At the end of 30 seconds, an alarm will sound and the product switch will flash for
3 seconds. If the product does not require shaking, enter “0”. The number entered will appear in
the right display. Press
to lock in the programmed time.
8.
hd_
(Hold Time) appears in the left display. Set the time the product may be held before
disposal, anything from 13 seconds to 60 minutes. If you do not wish to use the hold time
feature, enter 0. Press
to lock in the time.
Содержание 8195916
Страница 23: ...THIS PAGE INTENTIONALLY LEFT BLANK...
