7
© 2018 Fryette® Amplification. All rights reserved. Specifications subject to change without notice.
AUX INPUT SECTION
18. AUX INPUT – This input can be used to run preamps or pedals through the CAB + MIC Emulation of the
POWER LOAD. You can also send full range recordings through the POWER LOAD to add the CAB + MIC
Emulation to pre-recorded tracks.
19. AUX LEVEL SWITCH – This switch engages a -10 dB pad on the Aux Input for use with high level or low
level signal sources.
Note: When nothing is plugged into the Aux Input Jack, the Aux Level switch acts as a sensitivity
pad for the front panel level control. This is ideal when running a cranked, non-master volume high-
powered tube amplifier.
HEADPHONE FX LOOP SECTION
NOTE: This is a dedicated effects loop for the headphone out only.
This effects loop does not feed the direct outputs. When using the Power Load™ for live performance or
direct recording, place effects before your amp or after (using the mixing console inserts or digital plug
ins). (See the sample set up examples in this manual).
20. HEADPHONE JACK – The headphone output is a ¼” stereo headphone output. CAUTION: This professi-
onal-quality headphone amplifier is capable of high sound pressure levels. Use care when setting and
adjusting volume levels during use.
21. PROGRAM INPUT – This is a 3.5 mm input jack for plugging in your MP3 player, tablet, smartphone, CD
player or cassette deck. This input is unaffected by the effects loop, global eq, and cab + mic emulation.
This input can only be heard through the headphone output. The program level in the headphones is
determined by the output level control of the device being used.
22. FX RETURN R – High impedance effects return jack for use with external effects processor.
23. FX RETURN L – High impedance effects return jack for use with external effects processor.
24. FX SEND – Sends a buffered low impedance mono signal out to your external effects.
REAR PANEL OVERVIEW – CONTINUED
YOUR SETTINGS / NOTES
