7
Troubleshooting
If the machine ever stops working follow these steps.
1.
Check for a jam in the machine (first unplugging from power source).
2.
Check that there is 120V at the power supply connection.
3.
Check that the hopper and knife block are fitted correctly. The safety interlocks
will automatically prevent the machine from running if the knife block, or the
hopper isn’t seated and secured properly.
4.
Check the circuit breaker is in normal (reset) position.
Should the machine require repair or service, only Fry Factory Inc. or its authorized agents
should do so. Please contact our service department for assistance.
Note:
Only genuine Fry Factory Inc. replacement parts should be used to service or repair
this machine.
Health & Safety Considerations
The operator should be aware of the following:
Note
: This list is for guidance only. The operator must undertake their own health and
safety risk assessment prior to using this equipment. No one should use this equipment
without being fully trained in its use and its hazards.
Loss of stability
•
Hazard of impact and crushing to the person’s body.
Electrical Hazard
•
Hazard of electrical shock by direct or indirect contact with live parts if the main
power supply cable is damaged.
Hazards to the operator
