1.
3
Electrical Supply Connection
Once the fry cutter is in the appropriate position, the adjustable feet should be adjusted
to make the rear of the machine slightly higher than the front.
2.
The electrical supply connection should be made to a power outlet, or isolator mounted
on the wall close to the machine.
3.
The outlet should be rated at 15 amps. The machine is fitted with a 8-amp circuit
breaker.
Specifications
: 120V 60Hz Single Phase. Running amps 6.4A
Recommended
: It is advised that a Ground Fault Circuit Interrupter (GFCI) be fitted to the
electrical circuit.
Warning
: The main power supply must be earthed.
