Fruehauf ArgoMax, Руководство пользователя - Журнал технического обслуживания, Страница: 34 / 64

34
Hydraulic connection:
Refer to the sticker on the cylinder to find out the maximum working pressure for our tipper equipment.
Some hydraulic systems deliver higher pressure, in which case:
⇒ a sealed pressure limiter must be fitted to the circuit to deliver the maximum authorised pressure,
⇒ the tractor must be fitted with a direct return,
⇒ it is essential to connect:
- the “supply” hose
- the booster pressure oil return” hose
TIPPERS >
HITCHING
TIPPERS >
LOADING
Before loading, make sure the tipper is resting on the chassis. If not, switch the body manifold control to the lowering position to
avoid excess pressure in the hydraulic circuit.
The diversity of transported materials have slipping characteristics that could cause an imbalance during tipping (sticking phenom-
enon,…) that could result in tipping over.
It is essential to consult the loader to define the product to place between the tipper body and the load to favour its flow for risk-
free tipping.
The load must always be:
⇒ evenly spread along the length and the width,
⇒ within the authorised gross weight,
⇒ not concentrated at the front or rear on or a same side.