- 2 -
2.- POSITIONING
`
To guarantee a good operation, place the machine in a completely plane place
.
`
Once placed the machine, activate the brakes of the front wheels to avoid any
displacement. Disable the brakes every time the machine be moved. Only for SH-
7000 Model.
`
Don’t move the machine when it´s working.
3.- ELECTRICAL CONNECTION
Â
AVOID ALL ACCIDENTAL GROUND STARTING. Before connecting the machine, verify
that all the elements of the machine are properly placed; otherwise it could cause a
breakdown.
Â
CHECK THAT VOLTAGE OF ELECTRIC NETWORK is the same as the one shown in the
identification sheet of the machine.
Â
THE CONNETION INSTALLATION should possess differential protection and own
thermal magneto, also protected upstream.
Â
DO NOT START THE MACHINE IF THE ELECTRIC CABLE OR PLUG ARE DAMAGED.
Â
CONNECT THE PLUG to the electric network (230 V – 220 V – 110 V)
Note:
Make sure that the ground connection is propely done and according with the valid
standards.
4.- ON AND OFF
FIG 1
•
Check that all the elements of the machine are in good position and that the
machine’s plug is connected to the electric network of 230 V – 220 V – 110 V.
•
The switch button is located in the right side of the machine; to switch it on press the
button in a way that the circle is in the area that stands out. (FIG. 1)
•
To stop the machine, press the switch in a way that the line is in the area that stands
out. (FIG. 1)
•
To stop the machine push the button. ( FIG. 1)
