FrSky is continuously adding features and improvements to our products. To get the most from your product, please check
the download section of the FrSky website www.frsky-rc.com for the latest update firmware and manuals
1.3 For transmitter modules (XJT as an example), choose D16 mode first, and turn on External RF on the
transmitter while holding the F/S button on the module, release the button and the RED LED on XJT module will
flash.
2. Power on the USB Dongle while holding its BIND button. The RED LED on the receiver will flash and the GREEN
LED is on, indicating the binding process is completed.
3. Exit the Bind mode and power off the USB Dongle.
4. Power on the USB Dongle, the GREEN LED is flashing and The RED LED is off, indicating the USB Dongle is
receiving commands from the transmitter. The USB Dongle / transmitter module binding will not have to be
repeated, unless one of the two is replaced.
Instruction Manual for FrSky XSR-SIM
