frozy FR25 SI, Руководство пользователя

Страница: 12 / 20

Chapter 04. Use of the Ice Maker
Operating the Ice Maker
After installing your Ice Maker following the instructions above and making all
necessary connections;
1. Make sure that the power outlet you are using for your ice-maker is live and
has power.
2. Turn on the water.
3. Set the On-Off button at the front of your product to the On position. (When
you set it to the On position, the power light on the button will turn on.)
4. The product will automatically go into a delay-time mode for 1 minute after
it is turned on.
5. At the end of the delay-time mode, the product will start getting water and
making ice.
6. Your product will complete the ice-making cycle after a certain time,
depending on the ambient and water temperature.
7. To change the size of the ice made by the machine, adjust the potentiometer
in the direction of the arrow. (See Figure-2).
NOTE
In order to allow your product to make ice in the optimum size and time, you
need to wait for at least 2 hours after the installation, before turning on the
machine.
Shutting Off The Ice Maker
Set the power button at the front of your Ice Maker to “Off” position.
Unplug the product if you are not going to use the ice-maker for a long time.
Turn off the water.
There are some malfunction and warning signals defined for the Red light on the
power button of the product as detailed in the chart below.
Function Mode On Off
Cleaning 3 sec 1 sec
Fault 3 sec 3 sec
Ice Bin Full 1 sec 1 sec