INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost-trol.com
GREGAL
SOLID LINES
D008270
Versión: 2
-10-
1.8.
STORAGE
Do not storage the cabinet outdoors; do not expose to climatic conditions or to
direct sunlight.
The cabinet with plastic cover may reach temperatures above 80° C in the sun,
which might result in the deformation of plastic parts.
Check the good condition of the packaging before storing the cabinet.
2.
INTALLATION OF REFRIGERATED DISPLAY CABINET
The installation of the appliance and the refrigerant unit must only be
made by the manufacturer’s service personnel or similarly skilled person.
2.1.
CABINET LOCATION
Consult the Construction Manager or the person responsible for the installation of
unit. Ask them to inform you of its installation location or if there are any changes
to where it is to be installed.
Check that the installation location chosen is suitable. To do this, make sure that
there is no air flow present, as this could affect the units by blowing hot air into
them. The unit must not be installed near air conditioning air discharge openings,
ventilators, doors or other machines that, due to their location, could expel warm
air from their condensing units into the cabinet or onto its condensing unit.
The refrigerated display cabinet must not be installed in places where
explosive gases are present. Do not expose the equipment to
atmospheric agents.
If the chosen location is not suitable for the installation of the cabinet, inform the
Construction Manager or the person responsible for the supermarket accordingly,
so that they can either specify another location or make the necessary
modifications that would make the original location suitable (closure of air vents,
removal of ventilators, closure of doors, etc.).
During the installation (or while carrying out maintenance) you must always wear
proper safety equipment to preserve your security.
Содержание GREGAL
Страница 4: ......
