FrontLine BPA LOW ENERGY, Руководство пользователя по оборудованию

Страница: 188 / 228

example, if an Frontline product is installed at C:\Users\Public\Public Documents\Frontline Test
Equipment\My Decoders\ then "My Decoders" cannot be set to any of the following:
l
C:\ My Decoders\
l
C:\Users\ My Decoders\
l
C:\Users\\Public\My Decoders\
l
C:\Users\Public\Public Documents\My Decoders\
l
or to any directory that already exists in the path C:\Users\Public\Public Documents\Frontline Test
Equipment\My Decoders\
Default Capture File Folder Checkbox
If the Use Last Opened Folder for Capture Files checkbox is checked, then the system automatically
changes the default location for saving capture files each time you open a file from or save a file to a new
location. For example, let's say the default location for saving capture files is Drive A > Folder A. Now you
select the
Use Last Opened Folder for Capture Files checkbox. The next time, however, you open a
capture file from a different location, Folder B > Removable Flash Drive for example. Now when you save the
capture file, it will be saved to Folder B > Removable Flash Drive. Also, all subsequent files will be saved to that
location. This remains true until you open a file from or save a file to a different location.
There is one caveat to this scenario, however. Let's say you have selected
Use Last Opened Folder for
Capture Files
and opened a file from a location other than the default directory. All subsequent capture
files will be saved to that location. Suppose, however, the next time you want to save a capture file, the new
file location is not available because the directory structure has changed: a folder has been moved, a drive
has been reassigned, a flash drive has been disconnected, etc. In the case of a "lost" directory structure,
subsequent capture files will be saved to the default location.
ComProbe software will always try to save a
file to the folder where the last file was opened from or saved to, if
Use Last Opened Folder for
Capture Files
is checked. If, however, the location is not accessible, files are saved to the default directory
that is set at installation.
If the checkbox is unchecked, then the system always defaults to the directory listed in the File Locations
dialog.
7.1.3 Side Names
The Side Names dialog is used to change the names of objects and events that appear in various displays.
The Side Names dialog will change depending on the sniffing technology in use at the time the software
was loaded.
Changes to the Names are used throughout the program.
Figure 7.6 - Example: Side Names Where "Slave" and "Master" are current
TELEDYNE LECROY Chapter 7 General Information
181 Frontline BPA low energy Hardware & Software User Manual