EN
4
STEP 4
Insert the handlebar post cover (22) into the hand-
lebar post (17); and connect the Extension Wire
(13) with the sensor wire (11), at the same time,
hook the tension cable (12) to the cable from tensi-
on controller (25).
After making sure the wires are well connected,
then fix the handlebar post (17) to the main frame
(1) with the Inner hex bolts (14) and arc washers
(6).
STEP 5
Feed the pulse wire (28) out of the handlebar post
(17) through the top of the computer bracket. At-
tach the handlebar (27) to the handlebar post (17)
with the inner hex bolt (31), spring washer (30)
and flat washer (34), and then cover the handlebar
chuck cover (32) as shown.
STEP 6
Connect all the wires (13 & 28) to the wires come
from the computer (24), and then install the compu-
ter (24) onto the computer bracket on the top of the
handlebar post (17) with the cross pan head screw
(21) as shown.